Table of Contents
Advertisement
Quick Links
Table of Contents
HOP-LP Portable Steel Dumping Hoppers
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description of
it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance comply
with laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels,
and accessories, call our Technical Service and Parts Department at (260) 665-7586. The department can
also be contacted online at https://www.vestil.com/page-parts-request.php.
Electronic Copies of Instruction Manuals
Additional copies of this manual may be downloaded from
manuals.php.
Specifications..............................................................................................................................
Words...............................................................................................................................
Instructions.......................................................................................................................
Exploded View and Bill of
Brake................................................................................................................
Hopper...............................................................................................................
Hopper.........................................................................................................
Maintenance.........................................................................................................
........................ ....................................................................................................
Table of Contents
Vestil Manufacturing Company
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Table of Contents
Materials..............................................................................................
Condition..................................................................................................
Copyright 2021 Vestil Manufacturing Co.
Rev. 9/26/2023
Fax: (260) 665-1339
www.vestil.com
HOP-LP, MANUAL
info@vestil.com
https://www.vestil.com/page-
Page 1 of 10
Page
2
2
3
4
5
5
-
6
7
7
-
8
8
8
-
9
9
10
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vestil HOP-LP
Summary of Contents for Vestil HOP-LP
-
Page 1: Table Of Contents
Fax: (260) 665-1339 www.vestil.com info@vestil.com HOP-LP Portable Steel Dumping Hoppers Receiving Instructions After delivery, remove the packaging from the product. Inspect the product closely to determine whether it sustained damage during transport. If damage is discovered, record a complete description of it on the bill of lading. -
Page 2: Specifications
Table of Contents Rev. 9/26/2023 HOP-LP, MANUAL SPECIFICATIONS Documents that provide specifications for HOP-LP-series hoppers are available online to anyone who visits Vestil’s website. Specifications include dimensions, net weight, and capacity information. access appropriate specifications document, navigate https://www.vestil.com/product.php?FID=451. Scroll to the Product Specifications Table portion of the page. -
Page 3: Safety Instructions
HOP-LP, MANUAL SAFETY INSTRUCTIONS Vestil strives to identify foreseeable hazards associated with the use of its products, but no manual can address every possible risk. Minimize the likelihood of injury by recognizing the hazards identified below and by inspecting and maintaining the product as instructed in INSPECTIONS &... - Page 4 Table of Contents Rev. 9/26/2023 HOP-LP, MANUAL HOP-LP EXPLODED VIEW AND BILL OF MATERIALS Axle Pin bracket receiver Release lever pin (integral part of 4) Caster mounting plate Swivel caster Rigid caster Swivel caster with brake (11) (12) (13) Item Part no.
-
Page 5: Using The Caster Brake
” lock nut; then d) Insert the handle legs into the sockets as shown below and tighten the ” -16 x ” set screws against the legs. PARTS Handle Lock Carriage bolt Right socket Left socket bracket bracket Tighten set screw against leg Carriage bolts Table of Contents Copyright 2021 Vestil Manufacturing Co. Page 5 of 10... - Page 6 Press the back end of the chute onto the base until the latch lever engages the latch bar. Push the finger tab at the top end of the latch lock bracket until the bracket engages the latch bar. Table of Contents Copyright 2021 Vestil Manufacturing Co. Page 6 of 10...
-
Page 7: Loading & Using The Hopper
Acquire a copy of the Standard before putting this device into service. Apply all relevant parts of Part II: For the User. If instructions provided in this manual apparently conflict with the Standard, then apply the instructions in the Standard. Vestil requests that you immediately share any conflicts you discover with its TECHNICAL SERVICE personnel. -
Page 8: Record Of Satisfactory Condition
4.) Release mechanism – Verify that the mechanisms function properly: 1) torsion spring firmly latches the lock release lever assembly (“lever assembly”) to the chute; 2) the latch lock bracket should seat on Table of Contents Copyright 2021 Vestil Manufacturing Co. Page 8 of 10... - Page 9 Replace all labels that are, or later become, damaged, missing, or not easily readable (e.g. faded). To order replacement labels, contact the TECHNICAL SERVICE AND PARTS DEPARTMENT online at https://www.vestil.com/page-parts-request.php. Alternatively, you may call (260) 665-7586 and ask the operator to connect you to the PARTS DEPARTMENT.
- Page 10 After Vestil receives your request for warranty service, an authorized representative will contact you to determine whether your claim is covered by the warranty. Before providing warranty service, Vestil will require you to send the entire product, or just the defective part (or parts), to its facility in Angola, IN.
Need help?
Do you have a question about the HOP-LP and is the answer not in the manual?
Questions and answers