Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine whether
it sustained damage during transport. If damage is discovered, record a complete description of it on the
bill of lading. If the product is undamaged, discard the packaging.
NOTE:
The end-user is solely responsible for confirming that product design, installation, use, and maintenance
comply with laws, regulations, codes, and mandatory standards applied where the product is used.
.
Table of Contents
Copyright 2017 Vestil Manufacturing Corp.
Rev. 1/15/2018
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Website:
www.vestilmfg.com
D-S
H
ERIES
Instruction Manual
Table of Figures
D-25 exploded parts diagram & bill of materials ......................... 4
D-33 exploded parts diagram & bill of materials.......................... 5
D-50 exploded parts diagram & bill of materials....................... 6
D-75 exploded parts diagram & bill of materials........................ 7
D-100 exploded parts diagram & bill of materials..................... 8
D-150 exploded parts diagram & bill of materials.................... 9
D-200 exploded parts diagram & bill of materials..................... 10
D-250 exploded parts diagram & bill of materials.................... 11
D-300 exploded parts diagram & bill of materials.................... 12
exploded parts diagram & bill of materials........................... 13
Fax: (260) 665-1339
e-mail:
OPPERS
D, MANUAL
info@vestil.com
Page 1 of 18