Vestil P-HOP Series Quick Start Manual

Vestil P-HOP Series Quick Start Manual

Portable steel hoppers

Advertisement

Quick Links

Table of Contents
P-HOP-Series Portable Steel Hoppers
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description of
it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance comply
with laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels,
and accessories, call our Technical Service and Parts Department at (260) 665-7586. The Department can
also be contacted online at https://www.vestil.com/page-parts-request.php.
Electronic Copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from
manuals.php.
Specifications...........................................................................................................................
Signal
Words............................................................................................................................
Safety
Instructions.....................................................................................................................
Caster
Installation.....................................................................................................................
FIGS. 1-4: Exploded Views and Bills of
National
Standards...................................................................................................................
Loading & Dumping a
Caster
Brake............................................................................................................................
Record of Satisfactory
Inspections &
Maintenance......................................................................................................
Labeling
Diagram..........................................................................................................................
Limited
Warranty......................................................................................................................
Table of Contents
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
www.vestil.com
Table of Contents
Materials............................................................................ 4, 5, 6,
Hopper.....................................................................................................
Condition................................................................................................
Copyright 2021 Vestil Manufacturing Corp.
Rev. 10/8/2021
V
M
ESTIL
ANUFACTURING
Fax: (260) 665-1339
e-mail:
P-HOP, MANUAL
C
.
ORP
sales@vestil.com
https://www.vestil.com/page-
Page 1 of 12
Page
2
2
3
3
7
8
8
-
9
9
9
9
-
10
11
12

Advertisement

Table of Contents
loading

Summary of Contents for Vestil P-HOP Series

  • Page 1 For answers to questions not addressed in these instructions and to order replacement parts, labels, and accessories, call our Technical Service and Parts Department at (260) 665-7586. The Department can also be contacted online at https://www.vestil.com/page-parts-request.php. Electronic Copies of Instruction Manuals Additional copies of this instruction manual may be downloaded from https://www.vestil.com/page-...
  • Page 2: Specifications

    Table of Contents Rev. 10/8/2021 P-HOP, MANUAL SPECIFICATIONS Documents that provide specifications for P-HOP series hoppers are available online to anyone who visits Vestil’s website. Specifications include dimensions, net weight, and capacity information. To access appropriate specifications document, navigate this webpage: https://www.vestil.com/product.php?FID=450.
  • Page 3: Safety Instructions

    • ALWAYS engage the caster brake when the hopper is stationary/not in use. CASTER INSTALLTION Each P-HOP series hopper has 2 rigid casters in the front and 2 swiveling casters in back, one of which is equipped with a brake. To install the casters, insert the caster mounting plates into the quick- connect caster brackets.
  • Page 4 COTTER PIN Z PLATED, 3/16 x 2 09-145-018 CHAIN, 5/16" x 56" LG 16-132-248 GFN-8/2-S-SWB 99-112-006 PIN, CLEVIS 65080 EXTENDED PRONG COTTER PIN, ZINC FINISH, 1/8" x 2" Table of Contents Copyright 2021 Vestil Manufacturing Corp. Page 4 of 12...
  • Page 5 COTTER PIN Z PLATED, 3/16 x 2 09-145-018 CHAIN, 5/16" x 56" LG 16-132-248 GFN-8/2-S-SWB 99-112-006 PIN, CLEVIS 65080 EXTENDED PRONG COTTER PIN, ZINC FINISH, 1/8" x 2" Table of Contents Copyright 2021 Vestil Manufacturing Corp. Page 5 of 12...
  • Page 6 16-132-208 CASTER, SWIVEL, 8" X 2" 16-132-248 GFN-8/2-S-SWB 16-132-233 CASTER, RIGID, GFN-8/2-R 99-112-006 PIN, CLEVIS 37-146-005 SPRING,TORSION,HOPPER RELEASE 65080 EXTENDED PRONG COTTER PIN, ZINC FINISH, 1/8" x 2" Table of Contents Copyright 2021 Vestil Manufacturing Corp. Page 6 of 12...
  • Page 7 16-132-208 CASTER, SWIVEL, 8" X 2" 16-132-248 GFN-8/2-S-SWB 16-132-233 CASTER, RIGID, GFN-8/2-R 99-112-006 PIN, CLEVIS 37-146-005 SPRING,TORSION,HOPPER RELEASE 65080 EXTENDED PRONG COTTER PIN, ZINC FINISH, 1/8" x 2" Table of Contents Copyright 2021 Vestil Manufacturing Corp. Page 7 of 12...
  • Page 8: National Standards

    Before putting this device into service, acquire a copy of the Standard. Apply all relevant parts of Part II: For the User. If instructions provided in this manual apparently conflict with the Standard, then apply the instructions in the Standard. Vestil requests that you immediately share any conflicts you discover with its TECHNICAL SERVICE personnel.
  • Page 9: Inspections & Maintenance

    3. Lock the latch by reversing the process of step 3. DO NOT move the hopper until the latch is locked! CASTER BRAKE Each P-HOP series hopper has 2 swiveling Brake casters in back, one of which is equipped with a lever brake.
  • Page 10: Maintenance

    NEVER modify the hopper. Modifications automatically void LIMITED WARRANTY (p. 12) and might make the hopper unsafe to use. Step 5: Make a dated record of any repairs, adjustments, and/or replacements. Table of Contents Copyright 2021 Vestil Manufacturing Corp. Page 10 of 12...
  • Page 11 B: Label 220 (both sides) C: Label 635 (both rear corners of chute) D: Label 620 E: Label 547 (P-HOP-1) 548 (P-HOP-1.5) 632 (P-HOP-0.5) F: Label 208 (both sides & back) Table of Contents Copyright 2021 Vestil Manufacturing Corp. Page 11 of 12...
  • Page 12 Warrantee (you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid. Definition of “original part”? An original part is a part used to make the product as shipped to the Warrantee.

Table of Contents