Vestil H Series Instruction Manual
Hoppers
Hide thumbs
Also See for H Series:
- Instruction manual (11 pages) ,
- Instruction manual (13 pages) ,
- Manual (11 pages)
Advertisement
Quick Links
Table of Contents
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine whether
it sustained damage during transport. If damage is discovered, record a complete description of it on the
bill of lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance
comply with laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels,
and accessories, call our Technical Service and Parts Department at (260) 665-7586. The department can
also be contacted online at http://www.vestilmfg.com/parts_info.htm.
Electronic copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from
manuals.php.
Table of Contents
Specifications............................
Signal
Words.............................
Hazards....................................
Loading the
Chute......................
Using the
Hopper......................
Stacking
hoppers.......................
Inspections &
Maintenance..........
Limited
Warranty........................
Table of Contents
Rev. 3/10/2020
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Web:
www.vestilmfg.com
H-S
H
ERIES
Instruction Manual
Table of Figures
2
Exploded view & bill of materials: H-25 series
3
Exploded view & bill of materials: H-50 series
3
Exploded view & bill of materials: H-100 series
9
Exploded view & bill of materials: H-150 series
9
Exploded view & bill of materials:
10
Labeling Diagram...............................................................11
10
12
Copyright 2019 Vestil Manufacturing Corp.
H-hoppers MANUAL
Fax: (260) 665-1339
e-mail:
OPPERS
https://www.vestil.com/page-
H-200-HD.............................
info@vestil.com
hoppers...............
4
hoppers...............
5
hoppers..............
6
hoppers.............
7
8
Page 1 of 12
Advertisement
Related Manuals for Vestil H Series
Summary of Contents for Vestil H Series
- Page 1 Exploded view & bill of materials: H-150 series hoppers…………. Using the Hopper…………………. Exploded view & bill of materials: H-200-HD……………………….. Stacking hoppers……………….…. Labeling Diagram………………………………………………………11 Inspections & Maintenance………. Limited Warranty………………..…. Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 1 of 12...
- Page 2 H-hoppers MANUAL SPECIFICATIONS Thank you for purchasing an H-series, self-dumping hopper made by Vestil Manufacturing Co. (“Vestil”). Our hoppers are durable, high-quality products that provide many safety-enhancing features. Standard H-series hoppers include (2) fork pockets, dump-actuating cable that allows the hopper to be dumped by the forklift driver without having to dismount the forklift, and either a safety chain or safety strap that attaches the hopper to the carriage of your fork truck.
- Page 3 SAFETY INSTRUCTIONS Vestil strives to identify all foreseeable hazards associated with the use of its products. However, material handling is dangerous and no manual can address every conceivable risk. Ultimately, the most effective way to prevent injury is to apply sound judgment whenever using this device.
- Page 4 ” quick link Weldment, chute: 37-545-032 H-25-LD 37-545-003 H-25-MD 37-545-037 H-25-HD 37-514-082 Weldment, frame, base Weldment, lock, release, lever 37-537-021 assembly 09-145-018 ” chain, 56” long 99-145-084 Lap link Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 4 of 12...
- Page 5 37-545-033 H-50-LD 37-545-004 H-50-MD Lock 37-545-038 H-50-HD Latch lever 37-514-082 Weldment, frame, base toggle 37-537-021 Weldment, lock, release, lever assembly 09-145-018 ” chain, 56” long 99-145-084 Lap link Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 5 of 12...
- Page 6 Finger tab 37-545-008 H-100-MD 37-545-039 H-100-HD Lock Latch lever 37-514-083 Weldment, frame, base toggle 37-537-021 Weldment, lock, release, lever assembly 09-145-018 ” chain, 56” long 99-145-084 Lap link Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 6 of 12...
- Page 7 37-545-035 H-150-LD 37-545-009 H-150-MD Lock Latch lever 37-545-040 H-150-HD toggle 37-514-083 Weldment, frame, base 37-537-021 Weldment, lock, release, lever assembly 09-145-018 ” chain, 56” long 99-145-084 Lap link Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 7 of 12...
- Page 8 Bolt, HHCS, gr. 2, zinc-plated, ” – 18 x 2” Latch lever toggle 33006 Flat washer, zinc plated, USS, ” Nylon insert lock nut, gr. 2, zinc finish, ” – 37021 Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 8 of 12...
- Page 9 Step 6: Lock the latch. Press the latch lock forward until it firmly engages the latch bar. Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 9 of 12...
- Page 10 7.) Carriage chain: examine the carriage chain, its point of attachment to the base frame, and the quick links for damage. 8.) Labels: all labels must be firmly affixed in the locations shown in the LABELING DIAGRAM on p. 11. Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 10 of 12...
- Page 11 A: Model specific label; See tables below A: Label 375 Model Label Model Label Label 208 H-25-LD H-100-LD H-25-MD H-100-MD H-25-HD H-100-HD H-50-LD H-150-LD Label 220 H-50-MD H-150-MD H-50-HD H-150-HD H-200-HD 1093 Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 11 of 12...
- Page 12 Warrantee (you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid.