Table of Contents
H-100/150 Bump & Dump Hoppers
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to
determine whether it sustained damage during transport. If damage is discovered, record a
complete description of it on the bill of lading. If the product is undamaged, discard the
packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance
comply with laws, regulations, codes, and mandatory standards applied where the product is
used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts,
labels, and accessories, call our Technical Service and Parts Department at (260) 665-7586. The
department can also be contacted online at http://www.vestilmfg.com/parts_info.htm.
Electronic Copies of Instruction Manuals
Additional copies of this manual may be downloaded from
manuals.php.
Specifications...............................................................................................................................
Signal
Words....................................................................................................................
Safety Instructions
........................................................................................................
....
National
Standards............................................................................................................................
H-100-LD/MD/HD Exploded View and Bill of
H-150-LD/MD/HD Exploded View and Bill of
Bump and Dump Feature Exploded View and Bill of
Loading the
Chute...........................................................................................................
Using the
Hopper.............................................................................................................
Stacking
Hoppers...............................................................................................................................
Record of Satisfactory
Inspections &
Maintenance.............................................................................................
Labeling
Diagram............................................................................................................
Limited
Warranty............................................................................................................
Table of Contents
Rev. 3/11/2022
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Web:
www.vestilmfg.com
Table of Contents
Materials.........................................................
Materials..........................................................
Condition......................................................................................
Copyright 2022 Vestil Manufacturing Corp.
H-100/150-LD/MD/HD-BD MANUAL
Fax: (260) 665-1339
e-mail:
https://www.vestil.com/page-
Materials.............................................
info@vestil.com
Page
2
3
3
-
4
4
5
6
7
8
8
9
9
9
-
10
10
11
Page 1 of 11