Labeling Diagram - Vestil H Series Manual

Table of Contents
7.) Carriage chain: Examine the carriage chain, its point of attachment to the base frame, and the
quick links for damage.
8.) Labels: All labels must be firmly affixed in the locations shown in the

LABELING DIAGRAM

The unit should be labeled as shown in the diagram. However, label content and location are subject
to change so your product might not be labeled exactly as shown. Thoroughly photograph the unit when
you first receive it as discussed in the
record includes a photograph of each label. Replace all labels that are, or later become, damaged,
missing, or not easily readable (e.g. faded). To order replacement labels, contact the
online at http://www.vestilmfg.com/parts_info.htm. Alternatively, you may call (260) 665-7586 and ask the
operator to connect you to the
1023
208
220
Label 1023
Label 1037
Label 620: Left side in
line with release handle
Label 208
Table of Contents
Rev. 3/11/2022
Record of Satisfactory Condition
Parts Department.
1037
620
Label 995
A: Model specific label (627 shown); See table.
*Label 1096
* Not necessary if model specific label
includes1096 wording.
Copyright 2022 Vestil Manufacturing Corp.
H-100/150-LD/MD/HD-BD MANUAL
LABELING DIAGRAM
section on p. 9. Make sure that your
995
Label 220
on p. 12.
Parts Department
1023
A + 1096
208
Model Label
H-100-LD 533
H-100-MD 536
H-100-HD 539
H-150-LD 534
H-150-MD 537
H-150-HD 590
Page 10 of 11