Connections Of Power Repeaters And Power Supplies - Pepperl+Fuchs KLD2-PR-Ex1.IEC. Manual

Power repeater / power supply according to IEC 61158-2
FOUNDATION FieldbusPower supply, connections and operating
7.4

Connections of power repeaters and power supplies

In principle, both power repeaters and power supplies can be supplied with power
through the power rail. If you do not want power to be supplied to the segment cou-
plers through the power rail, the following terminals are available for this purpose:
Table 1: Connections for the power supply
KLD2-STR-1.24.400.IEC
KLD2-STR-1.13.225.IEC
+
-
FE
The following tables show the pin assignment for power repeaters and power sup-
plies:
Table 2: Bus connections of the power repeaters
IEC 61158-2
Host side
IEC 61158-2
Field side
Table 3: Bus connections of the power supplies
IEC 61158-2
Field side
Subject to reasonable modifications due to technical advances.
24
Pepperl+Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com
Terminal 35
Terminal 36
Terminal 34
Function
+
-
+
-
Shield
Function
+
-
KLD2-PR-1.IEC
KLD2-PR-NI1.IEC
Terminal 47
Terminal 48
Terminal 46
KLD2-PR-1.IEC
KLD2-PR-NI1.IEC
Terminal 28 or 40
Terminal 29 or 41
Terminal 3 or 15
Terminal 2 or 14
KLD2-STR-1.24.400.IEC
KLD2-STR-NI1.13.225.IEC
Terminal 3 or 12
Terminal 2 or 1
KLD2-PR(2)-Ex1.IEC
KLD2-PR(2)-Ex1.IEC1
Terminal 59
Terminal 60
Terminal 58
KLD2-PR(2)-Ex1.IEC
KLD2-PR(2)-Ex1.IEC1
Terminal 40 or 55
Terminal 41 or 56
Terminal 3 or 18
Terminal 2 or 17
Terminal 1 or 16
Copyright Pepperl+Fuchs, Printed in Germany