Subscribe to Our Youtube Channel
Related Manuals for Vela Tango Series
Summary of Contents for Vela Tango Series
- Page 1 S E R V I C E M A N U A L VELA chairs VELA Tango, VELA Salsa and VELA Samba VERSION: VELA Tango VELA Salsa VELA Samba...
-
Page 2: Table Of Contents
TABLE OF CONTENTS TECHNICAL SERVICE RIGHT OF COMPLAINT CLEANING CHAIRS WITH GAS SPRING HEIGHT ADJUSTMENT CHAIRS WITH ELECTRIC HEIGHT ADJUSTMENT MAINTENANCE CHECKLIST FOR TESTING AND CHECKING GENERAL 3.2.1 CASTORS 3.2.2 LUBRICATION OF INNER AND OUTER TUBES 3.2.3 WIRES 3.2.4 SEAT MECHANISM 3.2.5 SEAT AND BACKREST 3.2.6... -
Page 3: Technical Service
There is also a lot of helpful information on our website: www.vela.eu Contact VELA customer service: by phone +45 96 34 76 00 or email mail@vela.eu 1.1 RIGHT OF COMPLAINT VELA grants the right of complaint according to the current law of the country in which the chair was purchased. -
Page 4: Cleaning
2.0 CLEANING VELA chairs withstand thorough cleaning and can We also recommend regular maintenance after be reused. We recommend that professionals cleaning. This includes lubrication of inner and examine the chair following the checklist in section outer tubes described in section 3.2.2. -
Page 5: General
Check all wires and plugs for damage and loose connections and replace damaged or defective The wiring for VELA chairs with electric lift can be components. Please refer to the spare parts found on the spare parts drawing, which is available drawing (available at www.vela.eu) for a wiring... -
Page 6: The Electrical Functions Do Not Work
If it does not charge properly, check that all wires are connected as shown in the spare parts drawing. Regular service and maintenance may require If it still does not charge properly, contact your VELA parts of the chair to be disassembled to inspect distributor. -
Page 7: Adjusting Brake Pressure On Castors
3.5.1 ADJUSTING BRAKE PRESSURE ON CASTORS 3.5.4 ADJUSTING CLUTCH PLATES (Does not apply to VELA Samba models) (Does not apply to VELA Samba models and VELA Tango 300) The brake function works by clamping the wheel thread, so it may be necessary to adjust the brake... -
Page 8: Emc Details For Chairs With Electric Lift
0 % UT 1 cycle, and 70% UT 25 cycles (at 50Hz) / 70% UT 30 cycles (at 60Hz) Voltage interruptions: 0% UT 250 period for 50Hz 300 period for 60Hz www.vela.eu VELA :: Gøteborgvej 8-12 :: 9200 Aalborg SV :: Denmark :: +45 96 34 76 00 :: mail@vela.dk...
Need help?
Do you have a question about the Tango Series and is the answer not in the manual?
Questions and answers