1.0. INTRODUCTION DEAR CUSTOMER, We would like to thank you for choosing VELA Tango. We are certain that you will enjoy using this chair every day. This user manual contains useful information regarding settings, operation and maintenance of your VELA Tango.
200 kg. VELA assumes no responsibility for damage to the product or the user VELA Tango 300 with gas spring has that occurs due to: been tested and approved for users weighing up to 175 kg.
Several of the chair’s materials are recyclable. Please return the chair :: VELA Tango chair to VELA or to your local recycling centre. :: User Manual for the chair 1.4. CARE & MAINTENANCE We recommend an annual inspec- tion of VELA Tango to identify any defective or worn parts.
Note: VELA Tango El is also available with height adjustment via TANGO handheld control (see item 1.6.12.). 1.6.2. FIXED HEIGHT (VELA TANGO) VELA Tango 300 is available with fixed height. It is not possible to adjust the seat height of this chair. VELA TANGO 1.6.3.
1.6.5. ADJUSTING THE BACKREST ANGLE The backrest is angled by loosening the small screw on the back bolt, after which the backrest can be adjusted to the desired angle. Remember to tighten the bolt securely once the correct angle has been achieved. 1.6.6.
1.6.12. HANDHELD CONTROL (OPTIONAL) The handheld control is used to adjust the height of the chair via push buttons on the front. VELA :: Gøteborgvej 8-12 :: 9200 Aalborg SV :: Denmark :: Tel: +45 9634 7600 :: mail@vela.dk vela.eu...
Need help?
Do you have a question about the Tango 300 and is the answer not in the manual?
Questions and answers