Page 1
I N S T R U C T I O N F O R U S E VELA Latin 100/200/300 VARIANT: Manual no. 105378 VELA Latin 100 VELA Latin 200 VELA Latin 300 ISO 9001 ISO 14001 The chair’s design varies depending on the model...
1.9.3. Adjustment of seat height with lever 1.9.4. Adjustment of seat tilt 1.9.5. Adjustment of back height 1.9.6. Adjustment of back tilt 1.9.7. Back latch (VELA Latin 200) 1.9.8. armrest (optional) 1.9.9. Footrest ring (optional) 1.9.10. Armrest for sample collection*...
If you have questions, experience errors or adverse events, please contact your VELA supplier / VELA Medical dealer. We reserve the right to make changes. VELA/VELA Medical Gøteborgvej 8-12...
1.1. WARNINGS In case of an allergic reaction, stop using the chair and consult a doctor Only use original spare parts from VELA/VELA Medical Do not make any changes to the accessories that come with the chair Only use the chair for the intended purpose Only adjust the seat angle and backrest angle while the user is sitting in the chair and the user’s feet are flat on the floor...
The backrest arm slides down Tighten the screw further, as shown in section 1.9.1. You can tighten the screw hard without damaging the product If the above does not solve your problem, you should contact your VELA/ VELA Medical supplier.
IN GENERAL 1.3. LABELS USED ON THE CHAIR Warning Risk of shear and squeeze: Keep hands and fingers away from moving parts Labels 60 x 22.5 mm <Model name> <Model ref. no.> <Manufacturer> MEDICO <Safe working load> <Adress> <Production date/order no.> <Webpage>...
:: Use of spare parts and accesso- brake. The chair is not approved for use as a passenger seat in any ries that are not original VELA/ means of transportation and may VELA Medical products not be used as such.
The life expectancy of the chair is check the wheels and remove any five years for regular and proper residual threads, etc. use as long as VELA/VELA Medical, your VELA/VELA Medical supplier or a trained professional perform an 1.7.2. FRAME...
1.9. USER MANUAL Replacement of the gas spring may only be performed by the service support team from your dealer or a skilled technical person. 1.9.1. ATTACHING THE BACKREST Press the locking pin spring (1) and push the backrest arm through the hole.
Only operate the handle when someone is sitting in the chair - as the backrest tilts forward. 1.9.7. BACK LATCH (VELA LATIN 200) The backrest can be set to a specific angle by adjusting and secure the the bolt which is mounted on the rear side of the VELA backrest.
1.9.9. FOOTREST RING (OPTIONAL) A 45 cm footrest ring, adjustable in height. The footrest ring provides stability, support and comfort in the sitting position. A footrest ring is especially practical when the user is sitting high 1.9.10. ARMREST FOR SAMPLE COLLECTION* The armrest is adjust by loosening the screw under the cushion and regulate the angle of the armrest.
Need help?
Do you have a question about the Latin 100 and is the answer not in the manual?
Questions and answers