1.0 introduction dear customer We would like to thank you for purchasing a VELA Tango. We are sure that it will continue to give you pleasure well into the future. The directions for use contain use- ful information about positioning, operating, maintenance and technical data, etc.
The guarantee only applies when using original spare parts and accessories, as well as only to adjustments carried out by authorised service technicians. VELA does not accept responsibility for damage or injury to the product or user, which have arisen due to: •...
1.4 maintenance oF the VeLa tango 50 We recommend your VELA Tango 50 undergoes an annual service to find, for example, defective and worn parts. Ensure the removable parts are regularly tightened. Wheels: It is recommended that the wheels be checked at regular intervals to remove possible thread remnants, etc.
1.5 VeLa tango 50 usermanuaL 1.5.1. HEIGHT ADjUSTMENT The height of the VELA Tango 50 can be adjusted using the gas springs. This is done by pulling the small lever under the seat. (left side) 1.5.2. bAcK-HEIGHT The back can be adjusted by pulling the lever. The lever can be found behind the seat.
Page 7
125 kg 1.6.1. staBiLitY og BaLance The VELA Tango is designed as an everyday chair at home. It is intended for sedentary work and not as a wheelchair. All movement in the VELA Tango have an impact on the placement of the centre of gravity.
Need help?
Do you have a question about the Tango 50 and is the answer not in the manual?
Questions and answers