Pre-Set Sedeo Seating Fixed Centermount Leg Rest - Sunrise Medical SEDEO PRO Instructions For Use Manual

5.7 Pre-set Sedeo Seating Fixed Center mount leg rest
Removing the assembly (5.25)
1. Remove the two screws (A). (Use 5 mm hex key)
2. Fold forward the neoprene cover (C).
3. By hand, remove the two spacers (B).
4. Remove one screw (D) and lower the footrest
assembly from the seat.
Lower leg length (Fig 5.26)
1. Loosen the two screws per footplate (D) and adjust to the
desired height. (Use 5mm hex key)
2. When finished adjusting, tighten screws (D).
(Use 5mm hex key). See page 38 for specified torque values.
Calf Pad Height Adjustment (Fig 5.26)
1. Loosen the two screws per calf pad (A) and adjust calf pads
(C) to desired height. (Use 5 mm hex key)
2. When finished adjusting, tighten screws (A).
(Use 5mm hex key). See page 38 for specified torque values.
248020 Rev. C 21
Fig. 5.25
Fig. 5.26
SEDEO PRO