Pre-Set Fixed Center Mount Leg Rest (Short And Long) - Sunrise Medical SEDEO PRO Instructions For Use Manual

5.6 Pre-set Fixed center mount leg rest (short and long)

Removing the assembly (5.22)
1. Remove the 3 screws (A) and lower the footrest
assembly from the seat. (Use 5mm hex key)
Lower leg length (Fig 5.23)
1. Remove the six securing screws (B). (Use 5mm hex key)
2. Move footplate up or down to desired height.
3. Re-install screws (B) through adjustment holes and tighten
the hardware. See page 38 for specified torque values.
Calf Pad Height Adjustment (Fig 5.24)
1. Remove the two securing screws (C). (Use 5 mm hex key)
2. Move Calf Pads to desired height.
3. Tighten screws (C) through adjustment holes. See page 38
for specified torque values.
248020 Rev. C
248020 Rev. B
20
20
Fig. 5.22
Fig. 5.23
Fig. 5.24
SEDEO PRO
SEDEO PRO