Safety; Seating Related Symbols And Labels Used On The Product; Safety: Temperature - Sunrise Medical SEDEO PRO Instructions For Use Manual

2.0 Safety

Follow the instructions carefully next to these warning
symbols! Not paying careful attention to these instructions
could result in physical injury or damage to the wheelchair
or the environment. Wherever possible, safety information is
provided in the relevant chapter.

2.1 Seating related symbols and labels used on the product

The signs, symbols and instructions .. affixed to the wheelchair
comprise part of the safety facilities. They must never be covered
or removed. They must remain present and clearly legible
throughout the entire lifespan of the wheelchair.
Replace or repair all illegible or damaged signs, symbols and
instructions immediately. Please contact your authorized dealer
for assistance.
Fig 2.1: Warning – Danger of finger entrapment (pinch point).
Fig 2.2: Warning – Ensure that the seat interface quick release is
screwed in tight before using your wheelchair, especially
on a slope.
Fig 2.3: Warning – Do not drive your wheelchair on a slope with
the backrest reclined.
Fig 2.4: Warning – Maximum user weight for the wheelchair:
250 lbs (113 kg), 300 lbs (136 kg), 350 lbs (158 kg),
or 450 lbs (204 kg).

2.2 Safety: Temperature

WARNING!
Avoid physical contact with the wheelchair's motors at all
•
times motors are continuously in motion during use and can
reach high temperatures. After use, the motors will cool
down slowly. Physical contact could cause burns. Allow the
motors at least 30 minutes to cool down, after using.
If you do not use the wheelchair, ensure that it is not exposed
•
to direct sunlight for lengthy periods of time. Certain parts of
the wheelchair, such as the seat, the back and the armrests
can become hot if they have been exposed to full sunlight for
too long. This may cause burns or allergic reactions to the
skin.
248020 Rev. C 5
Fig. 2.1
Fig. 2.2
Fig. 2.3
Fig. 2.4
SEDEO PRO