Sunrise Medical SEDEO PRO Instructions For Use Manual page 17

Armrest pad width
To remove: (Fig 5.13 and 5.14)
1. Loosen screws (A).
2. Remove armpad (B).
3. Loosen screws (C) by one turn.
4. Remove mounting plate (D).
To position: (Fig 5.15 and 5.16)
5. Slide slot (E or F) onto clamp nuts (G).
CAUTION!
Ensure that the slot (E or F) and clamp nuts (G) are fully
engaged.
6. Adjust the depth of (D) and tighten screws (C).
See page 38 for specified torque values.
To reinstall: (Fig 5.13)
7. Reinstall the armpad (B) with screws (A).
See page 38 for specified torque values.
248020 Rev. C
B
G
6
17
Fig. 5.13
2
A 1
Fig. 5.14
D
4
C
3
Fig. 5.15
5
D
E F
Fig. 5.16
D
C
6
SEDEO PRO