Seating Systems; Upholstery Fabric; Wiring And Connectors; Assignable Controls - Sunrise Medical SEDEO PRO Instructions For Use Manual

4.7 Seating systems

DANGER!
• Use of a seating system not approved by Sunrise
Medical may affect or interfere with other parts
of the system.
• Never change the seating system unless you
consult your authorized dealer first.
• Never raise your seating system to a height of
more than 19" (482mm) (measuring from the
front of the seat pan to the floor) with all
actuators in their home position.

4.8 Upholstery fabric

DANGER!
1. Replace worn or torn fabric of the seat sling and/or
seat back as soon as possible. If you fail to do so,
the seat may fail and cause you to fall. Worn or
torn fabrics may increase the potential for a fire
hazard.
2. Fabric will deteriorate with age and use. Look for
fraying, thin spots, or stretching of fabric at rivet
holes. Replace fabric as required.
3. Be aware that washing may reduce flame
retardation qualities of the fabric.

4.9 Wiring and connectors

WARNING!
Never pull on cables directly. This can result in
wires breaking inside the connector or harness. To
remove a plug or connector, always grasp the plug
or connector itself.

4.10 Assignable controls

DANGER!
It is possible to assign a function to an input control
(buttons, jacks) to your seating system . If controls
have been assigned to perform a dual or alternate
function ensure you know what each control
operates. Please contact your authorized dealer if
you do not receive this information. Failure to do so
may result in damage and/or injury.
248020 Rev. C

4.11 Power seating safety

DANGER!
1. Operation
While driving this seating system in the reclined,
•
elevated, or tilted position use caution.
•
Do not attempt to operate any power seating
option while positioned on an incline.
•
Do not attempt to operate any power seating
option while this seating system is in motion.
•
Do not attempt to operate the recline, lift, or tilt
power seating options around children. Through
programing it is possible to reverse the direction
of all powered seating functions, ensure you
know which direction your seat is going to move
before operating. Please discuss with your
authorized dealer which direction the power
seating functions have been programed.
2. Reduced Speed Driving (Creep)
This power system is designed to automatically
reduce the maximum driving speed to a creep
mode when certain power seating limits are
reached. Depending on the configuration of the
chair there might be multiple creep speeds.
Please discuss the multiple creep speeds with
your authorized dealer.
3. Pinch points
Pinch points may occur when operating the
powered seating options on this system. Ensure
all hands and body parts are clear of all power
seating components that may result in pinch
points before operating them.
4. Tilting Power Base with Push Handles
Do not attempt to tilt power wheelchairs by
pulling down on the push handles. Power
wheelchairs have heavy bases. As such,
attempting to tilt a power seating system to
traverse obstacles can damage components in
the seating system and/or modular actuators.
10 SEDEO PRO