5.2 Pre-set armrests
Flip back armrests / Single Post Removable armrests width
(Fig 5.5)
Fine adjustments can be done with the armrest only, for larger
adjustments also pre-set the seat plate width.
1. Loosen (A) by one turn.
2. Adjust (B) to the desired position
3. Tighten (A). See page 38 for specified torque values.
CAUTION!
• Please check that the new armrest position does not
interfere with any seat positioning
Reclining flip back armrest width (Fig 5.6)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired position
3. Tighten (A). See page 38 for specified torque values.
CAUTION!
• Please check that the new armrest position does not
interfere with any seat positioning
Seat plate width (Fig 5.7)
Lift the seat cushion off the Velcro© strips to access the
seat plates.
1. Loosen (A) by one turn.
2. Adjust (B) to the desired position
3. Tighten (A). See page 38 for specified torque values.
The seat width is indicated by the scale that runs alongside
each slot (B).
248020 Rev. C
A
1
3
B
B
14
B
2
Fig. 5.5
Fig. 5.6
A
B
Fig. 5.7
SEDEO PRO