Pre-Set Reclining Flip Back Armrests - Sunrise Medical QUICKIE Sedeo Pro Instructions For Use Manual

4.5 Pre-set Reclining flip back armrests

Armrest height
Fine or gross adjustment it is a two-part process:
PART 1 (Fig. 4.25)
1. Turn (A) in order to adjust (B).
PART 2 (Fig. 4.26)
1. Loosen (A) by one turn
2. Adjust (B) to the desired position.
3. Thighten both screws again
Armrest pad depth (Fig.4.27)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired position.
3. Tighten (A).
NOTE
In order to reach the rear screw in lower armrest heights, loosen
screws (A) of Fig 4.24 and adjust the angle of the pad first.
DANGER! / WARNING!
All screws should be checked periodically for tightness. A loose arm
pad could slip down when pressed.
Sedeo Pro Rev.B
Fig. 4.25
B
A
1
M5
2
3
M5
Fig. 4.26
B
2
M5
1
A
M5
3
Fig. 4.27
A
B
1
M5
2
3
M5
15