Pre-Set Flip Back Armrests - Sunrise Medical QUICKIE Zippie/Teens Seat Instructions For Use Manual

4.4 Pre-set Flip back armrests

Armrest height
Major or minor adjustment it is a two-part process:
PART 1 (Fig. 4.9)
1. Turn (A) in order to adjust (B).
PART 2 (Fig. 4.10)
1. Loosen rear screw (A) by one turn then fully remove (B).
2. Adjust (C) to the desired position.
3. Replace and tighten (A) & (B).
Armrest pad depth (Fig.4.11)
1. Loosen (A).
2. Adjust (B) to the desired position.
3. Tighten (A).
NOTE
In order to reach the rear screw in lower armrest heights,
loosen screws (A) of Fig 4.10 and adjust the angle of the pad
first.
DANGER! / WARNING!
All screws should be checked periodically for tightness. A loose
arm pad could slip down when pressed.
Zippie & Teens Seat Rev. A
1
M5
3
M5
B
2
C
2
A
Fig. 4.9
A
Fig. 4.10
B
A
M5
1
M5
3
Fig. 4.11
2
B
1
M5
3
M5
11