Table of Contents
Advertisement
Do not install the inverter in:
-
Places where there is an increased risk of damage from farm
animals (horses, cattle, sheep, pigs, etc.)
-
Stables or adjoining areas
-
Storage areas for hay, straw, chaff, animal feed, fertilisers, etc.
Do not install the inverter in:
-
Places and environments subject to a heavy build-up of dust
-
Places and environments in which a heavy build-up of dust con-
taining conductive particles (e.g. iron chips) is likely
Do not install the inverter in:
-
Greenhouses
-
Storage or processing areas for fruit, vegetables or viticulture
products
-
Areas used in the preparation of grain, green fodder or animal
feeds
Install only on a solid surface
Max. ambient temperatures: -13 °F / +140 °F (-25 °C / +60 °C)
Relative humidity: 0-100%
The airflow within the inverter is from the right to the top (cold air taken in from the
right, hot air dissipated out of the top).
The exhaust air can reach a temperature of 70 °C.
If the inverter is installed in a switch cabinet or a similar sealed area, then forced-air
ventilation must be provided to ensure adequate heat dissipation.
If the inverter is to be installed on the outer wall of a cattle shed, maintain a minimum
all-round clearance of 2 m between the inverter and all ventilation and other openings
in the building.
The installation location must not be exposed to ammonia, corrosive vapours, salts or
acids.
7
Advertisement
Table of Contents
