Before Calling Your After Sales Service - Kernau KFRC 18262 NF E B User Manual

CHAPTER 7. BEFORE CALLING YOUR AFTER SALES SERVICE
Errors
Your fridge will warn you if the temperatures for the cooler and freezer are at improper
levels or if a problem occurs with the appliance. Warning codes are displayed in the
freezer and cooler indicators.
ERROR TYPE MEANING
SR
LF
LC
LF and LC
HC
LOPO
There is/are some part(s) out
„Failure
of order or there is a failure in
Warning"
the cooling process.
This warning especially appe-
Freezer
ars if there has been a power
compartment
failure for a long period or
is not cold
when the refrigerator is opera-
enough
ted for the first time.
This warning especially
appears if there has been
a power failure for a
Refrigerator long period or when the
compartment refrigerator is operated for the
is not cold first time. Ideal temperature
enough for the refrigerator
compartment is +4 oC. If you
see this warning, your foods
are at risk of spoiling.
„Not cold
This is a combination of the
enough"
LF and LC error types.
Warning
Refrigerator The food will start to freeze
compartment because the temperature is too
too cold
This is seen when the power
„Low voltage"
supply becomes lower than
Warning
WHY
Niezwłocznie skontaktuj się z serwisem
1. Use food within a short timeperiod. Do
2. Set the freezer temperature tocolder
values or set the SuperFreeze until the
compartmentgets to normal temperature.
3. Do not put fresh food in theappliance
1. Set the refrigerator temperature to
colder values or set the Super Cooling
mode until the compartment reaches
2. Open the door as little as possible until
You will see this failure when first
starting the appliance. It will clear
after the compartments reach normal
1. Check if the Super Cooling mode is
2. Decrease the refrigerator temperature
cold.
This not a failure. This prevents any
damage to the compressor. This warning
will clear after the voltage reaches the
170 V.
WHAT TO DO
w celu uzyskania pomocy.
not freeze foods thathas thawed.
until the fault hascleared.
normal temperature.
the fault clears.
temperature.
switched on.
values.
required level.
EN
61