Chapter 6. Before Calling Your After Sales Service - Kernau KFRC 18262.1 NF E B User Manual

CHAPTER 6. BEFORE CALLING YOUR AFTER SALES
ERRORS:
Your fridge will warn you if the temperatures for the cooler and freezer are at improper levels or if a problem
occurs with the appliance. Warning codes are displayed in the freezer and cooler indicators.
ERROR
MEANING
TYPE
SR „Failure" Warning.
Freezer
LF compartment is not
cold enough.
Refrigerator
LC
compartment is not
cold enough.
„Not cold enough"
LF i LC
Warning.
Refrigerator
HC
compartment too
„Low voltage
LOPO
Warning".
SERVICE
There is/are some part(s)
out of order or there is
a failure in the cooling
This warning especially
appears if there has been
a power failure for a
long period or when the
refrigerator is operated for
the first time.
This warning especially
appears if there has been
a power failure for a
long period or when the
refrigerator is operated
for the first time. Ideal
temperature for the
refrigerator compartment
is +4 °C. If you see this
warning, your foods are at
risk of spoiling.
This is a combination of
the LF and LC error types.
The food will start to freeze
because the temperature is
cold.
This is seen when the
power supply becomes
lower than 170 V.
WHY
Call a service agent for assistance as
process.
Use food within a short time period.
Do not freeze foods that has thawed.
Set the freezer temperature to colder
values or set the Super Freeze until
Do not put fresh food in the appliance
Set the refrigerator temperature to
colder values or set the Super Cooling
mode until the compartment reaches
Open the door as little as possible until
You will see this failure when first
starting the appliance. It will clear
after the compartments reach normal
Check if the Super Cooling mode is
Decrease the refrigerator temperature
too cold.
any damage to the compressor. This
warning will clear after the voltage
WHAT TO DO
soon as possible.
the compartment gets to normal
temperature.
until the fault has cleared.
normal temperature.
the fault clears.
temperature.
switched on.
values.
This not a failure. This prevents
reaches the required level.
EN
46