Additional Phone Configurations - LG-Ericsson IPECS 1000i Series User Manual

1000i Series IP Phone (SMB)
User Guide

Date/Time Set—Enter mm/dd/yy and press the OK button or press the HOLD(SAVE) button; enter
hh/mm and press the OK button or press the HOLD(SAVE) button.

Set ICM Only Mode—Dial the Station Range for ICM only calls (ex., 103-108=103108), press the OK
button or press the HOLD(SAVE) button.

Restore COS—Dial the Station Range to restore the COS (ex., 103-108=103108), and press the OK
button or press the HOLD(SAVE) button.

Monitor Conference Room—Enter the Conference Room number to view the number of attendees in
the Conference Room.

Delete Conference Room—Enter the Conference Room number and press the OK button or press the
HOLD(SAVE) button to delete.

9.2.7 Additional phone configurations

You can see and change the configuration related to your IP phone, other than network settings. This is
supported on 1030i, 1040i and 1050i only.
To set additional phone configurations:
1) Press the MENU button.
Select "6. PHONE CONFIG".
2)
3) Change the value of the desired menu.
4) Press the OK softkey or HOLD button to save.
To set the background image on IDLE screen:
1) Go to the additional settings menu.
Select "1. Background image".
2)
There are 2 or 3 pictures you can use. Press [Next] button to choose. IP phones basically provide 2
pictures for background image. You can add a third picture through the WEB manager. See the
next section 11 Web Manager for details.
3) Press the OK softkey or HOLD button to save.
To set the label transparency on IDLE screen:
1) Go to the additional settings menu.
Select "2. Label Transparency".
2)
3) Enter a value to use as the transparency of the label background on IDLE screen. The closer to
100, the more transparent.
4) Press the OK softkey or HOLD button to save.
To set the date transparency on Calendar screen:
1) Go to the additional settings menu.
Select "3. Calendar Transparency".
2)
3) Enter a value to use as the transparency of the date background on Calendar screen. The closer to
100, the more transparent.
4) Press the OK softkey or HOLD button to save.
54
Issue 1.0