▪ Introduction ▪ LCD MENU Contents - Soft Buttons and Bluetooth Status Icon - How to set up Bluetooth - How to enter the “Bluetooth” Menu - Turn-on Bluetooth and scan headset - Connect to the scanned BT headset - Connect to a saved BT headset - Disconnect the connected BT headset - Delete the connected BT headset - Delete a saved BT headset...
Introduction The 1000i supports a USB port so you can connect to a bluetooth headset using a BT dongle and provides LCD menu for bluetooth setting. The LCD menu for bluetooth will be shown only when a bluetooth dongle is installed. ▪...
Soft Buttons and Bluetooth Status Icon [LCD] The button functions used in the Bluetooth setup menu Buttons Functions BACK Return to the previous screen. Executes the selected menu. Turn on the Bluetooth Turn off the Bluetooth SEARCH Search for Bluetooth Headsets again. PAIR Add the searched BT headset and connect it.
How to set up Bluetooth [LCD] The Bluetooth setting menu is only displayed when the Bluetooth dongle is installed, so you must first plug the dongle into the USB port on the back of the phone. Procedure for setup : •...
How to enter the “Bluetooth” Menu [LCD] Enter the “Bluetooth” Menu Cloud(CM) Unified(eMG/UCP) Press the “Menu” button Press the “Menu” button Select the “1. User Organizer” Select the “6. PHONE CONFIG” Select the “#. Additional Settings” Select the “5. Bluetooth” Select the “5.
Turn-on Bluetooth and scan headset [LCD] 1. Select “5. Bluetooth” menu (Scanning) 2-1 Turn-on BT if it is off When Bluetooth is off 2-2 Activate BT Device found. When Bluetooth is on No connected /saved headset Connected / saved Icons headset exists Device not found.
Need help?
Do you have a question about the iPECS 1000i IPKTS and is the answer not in the manual?
Questions and answers