Alarm/Door Bell - LG-Ericsson IPECS 1000i Series User Manual

1000i Series IP Phone (SMB)
User Guide
To set the Wake Up Alarm clock:
1) Press the Transfer (PGM) button.
2) Dial 41 (Alarm register code for UCP/eMG), '41' is the Code that set the Wake Up Alarm Time.
If requested, enter the Wake-up alarm index number, "1 to 5".
3)
4) Dial the desired 2-digit hour (24-hour mode), then the 2-digit minute for alerting.
If requested, enter the Repeating type, "1" to "4".
5)
6) If requested, enter the date for the alarm as two (2) digits for year, month and day of the month.
7) Press the HOLD(SAVE) button.
To erase a Wake-Up alarm:
1) Press the TRANSFER(PGM) button.
Dial "42". '42' is the Code that releases the Wake Up Alarm Time.
2)
If requested, enter Wake-Up alarm index number, "1" to "5".
3)
4) Press the HOLD(SAVE) button.
To stop the alarm notification
✓
Lift the handset or press the Speaker button.
8.7

Alarm/Door Bell

The system can monitor up to four external contacts as Alarm or Door Bell contacts. The number of monitoring
circuits varies based on the iPECS platform and size. Please consult with your System Administrator for
further information.

Alarm Monitor—should the external contact activate; a unique Alarm Ring signal and LCD display may
be received. To restart the monitor circuit, the external contacts must be deactivated, and the Alarm
Ring signal terminated.

Door Bell—a unique Door Bell Ring, a single tone burst, may be received each time the external
contact is activated. A system contact can be assigned to act as a Door Open contact. You can then
activate the contact through dial codes, or a flexible button assigned with the Door Open code.
To terminate the Alarm signal:
✓
Dial *565 (Alarm Stop code, for UCP/eMG). '*565 ' is the Code that stop the Alarm signal.
To activate the Door Open contacts:
1) Lift the handset.
2) Dial the Door Open code, #* and contact number 1-4.
46
Issue 1.0