1000I Installation - LG-Ericsson IPECS 1000i Series User Manual

1000i Series IP Phone (SMB)
User Guide
1.6

1000i Installation

The 1000i Phones are shipped with the 1000i Phone, handset and coil cord, adjustable foot-stand, 1.5-meter
(~5-foot) Cat 5 cable terminated in RJ-45 connectors, and the Quick Guide.
An optional AC/DC adaptor is available for use when the network connection does not provide power to the
phone (support IEEE 802.3af PoE -Power over Ethernet-).
Several other options including DSS(Refer to section "1.7 DSS Installation" )and wall mounting(Refer to
section "1.8 Wall Mount Installation") are available.
The phone has a number of connections available including the handset and LAN connection, which are
required. Connections to your desktop PC, headset and optional power adaptor are incorporated in the phone
design.
To install the phone;
If needed install the DSS assembly as described in "1.7 DSS Installation" section.
1)
2) Insert the connectors of the coil cord into the handset and phone handset port as shown in A.
3) Insert the provided Cat 5 cable into the network connection of the phone and the LAN wall jack as
shown in B.
4) When needed, your desktop PC can be connected to the PC LAN port of the phone. Connect a Cat
5 cable (not provided) between the PC's LAN port and the PC LAN port of the 1000i phone as
shown in C.
Figure 1.6: 1000i Installation
6
Issue 1.0