LG-Ericsson IPECS 1000i Series User Manual page 15

1000i Series IP Phone (SMB)
User Guide
5) If your LAN port does not support Class 2 Power over Ethernet (PoE), you must install the optional
AC Power adaptor. Note do not connect the power adaptor if your port does support PoE. Connect
the DC output of the adaptor into the phone and the AC plug into a standard AC power outlet as
shown in D. Consult with your system administrator to determine if you must install the AC power
adaptor. You may need to contact your local ELG-Enterprise representative for the appropriate
power adaptor for your region.
Caution

To power your phone, use either PoE or the AC adaptor, not both.

Use the Ericsson-LG Enterprise approved AC power adaptor only. The AC adaptor is ordered
separately.
6) A compatible headset may be connected to the Headset jack in the bottom of the phone. As shown
in E, connect the headset plug into the headset jack. The 1000i phones are compatible with several
headsets. Please consult with your local Ericsson LG-Enterprise representative for a list of
headsets compatible with the 1000i.
The 1040i/1050i supports USB Headset. If a USB Headset is plugged in, the Headset function
operates as a USB Headset.
NOTE: If you plug in or unplug the USB Headset during a call, it will operate from the next call.
7) The phone includes a foot stand that can be installed to provide a 35° or 50° angle of the face of
the phone. If the phone is not wall mounted, install the foot stand at the desired angle. If wall
mounting, do not install the foot stand.
NOTE
Once installation is complete, the phone may require configuration of the network parameters before
becoming operational. These parameters should be modified by a trained technician only.
7
Issue 1.0