Page 1
Tribomatic automatic powder spray gun. The adapter is used to install the pump onto a Tribomatic pump mount. Fig. 1 Tribomatic Modular Pump with Adapter 343 545A Manual 37-35 E 2000 Nordson Corporation All rights reserved Issued 8/00...
NOTE: Always blow air from the pump end into the booth. 3. Clean the pump body by blowing air from the pump to the gun. 4. Clean the powder feed hose. Manual 37-35 343 545A E 2000 Nordson Corporation All rights reserved Issued 8/00...
Page 3
5. Inspect the powder feed tubing and replace any pieces that are worn or damaged. If powder is impact-fused inside the tubing, replace the tubing. 343 545A Manual 37-35 E 2000 Nordson Corporation All rights reserved Issued 8/00...
Page 4
S Adapter 941185 S O-ring, silicone, conductive, 0.875 x 1.062 in. 630043 S Holder, pickup tube NOTE A: Measured in increments of 0.03 m. AR: As Required Manual 37-35 343 545A E 2000 Nordson Corporation All rights reserved Issued 8/00...
Page 5
Tribomatic Modular Pump with Adapter Fig. 2 Tribomatic Modular Pump with Adapter Original copyright date 2000. Nordson, the Nordson logo, and Tribomatic are registered trademarks of Nordson Corporation. 343 545A Manual 37-35 E 2000 Nordson Corporation All rights reserved Issued 8/00...
Page 6
Tribomatic Modular Pump with Adapter Manual 37-35 343 545A E 2000 Nordson Corporation All rights reserved Issued 8/00...