Basic Setup - Optiview H.264 Setup Manual

Basic Setup

Follow the description to set up the configuration of date/time, recording, and viewing mode of the
DVR. All configurations can be set via either the DVR or DVRRemote, the remote software.
Enter OSD Setup menu:
Press MENU to enter the OSD main menu.
Enter password using Channel keys. The default passwords are as below.
Administrator Password
1 2 3 4
It is strongly suggested to change the passwords to prevent unauthorized access.
Date / Time Setting:
Follow the steps below to enter the Date/Time.
Select <Date/Time> in System Setup menu to enter the Date/Time menu.
Select the date and time using LEFT/RIGHT keys; then adjust the value using UP/DOWN keys.
The new date and time settings take effect after the changes are confirmed.
To Define Recording Settings:
Select <Record Setup> from the OSD main menu.
Select <ezRecord> as Preset Configuration option, and select wanted number of recording
day in ezRecord Setup; other setting will be automatic arranged by the unit.
Consider application needs and select a Preset Configuration setting from <Best Quality>,
<Standard>, and <Extended Record>. Detailed information refers to Optiview H.264 DVR
User's Manual, Preset Record Configuration.
Adjust the Recording schedule, Pre-alarm, Circular and Audio parameters.
When the settings are complete, press ENTER to confirm and save the settings; or ESC to
abort.
To Select Viewing Mode:
Press MODE button repeatedly to select the desired display mode. The available viewing
modes are full-screen, 2×2, 3x3, and 4×4 split-window.
4
User Password
4 3 2 1