Graf Optimax Pro Installation And Maintenance Instructions

Installation and maintenance instructions for the
GRAF Optimax Pro – External Filter 350-750sqm
Graf Optimax Pro
External Filter
Subject to plumbing
requirements the Graf
Optimax External Filter is
suitable for installation
with all brands of under-
ground rainwater tanks.
The points described in these
instructions must be followed
correctly. If not correctly ob-
served, any right to claim on
the guarantee may be re-
fused. For all
GRAF articles
there are separate installation
instructions enclosed in the
transportation packing.
Any missing instructions
must be requested directly
from Reece ASAP.
The installation must be car-
ried out by a
installer.
Disclaimer:
Products in this specification manual must by regulation be installed by licensed and registered trade people. The
manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior notification.
Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor takes no responsibility for
printing errors.
Contents
1.
General notes
1.1 Safety
1.2 Labelling/Tagging obligation
additional
purchased
2.
Installation requirements
& Performance Specifications
2.1 Optimax External pedestrian weight resistant
2.2 Installation of filter lift out handle
3.
Transport and storage
3.1 Transport
3.2 Storage
4.
Technical data
licensed
4.
1 Installing with a Graf Carat
4.2 Installing with a Graf Platin
5.
Excavation, Commissioning
& Servicing
5.1 Preparation of the excavation
5.2 Placing in the excavation and laying
the connections
5.3 Telescope installation
5.4 Back Filling
5.5 Commissioning
5.6 Service
Graf Optimax External Filter
1
Page 2
Page 2
Page 3
Page 3
Page 5