System Configuration - Panasonic S-LINK V User Manual

System Configuration

Example of system configuration
An example of the S-LINK V system is shown below.
For the specifications of each unit, refer to Chapter 4.
Input connector for PLC
SL-VS□
Output connector for PLC
SL-VP□
Power supply
unit
+10
24V DC %
– 5
Bus direct-connection
type S-LINK V
controller for FP2 /
FP2SH series
SL-VFP2
Bus direct-connection
S-LINK V
type
controller for
MELSEC-Q series PLC
manufactured by
Mitsubishi Electric Corp.
SL-VMEL-Q
Gateway controller (Note)
S-LINK V gateway
controller for CC-Link
SL-VGU1-C
S-LINK V gateway
controller for DeviceNet
SL-VGU1-D
S-LINK V gateway
controller for RS-485
/ RS-232C
SL-VGU1-485
S-LINK V gateway
controller for EtherCAT
SL-VGU1-EC
14
Control board
Controller
SL-VCU1
4-channel connector
output unit
SL-VTP4J
8-channel connector
output unit
SL-VTP8J
4-channel output terminal
SL-VTBP4
Note: For a detailed description of the following controllers, refer to their respective user's manuals.
SL-VGU1-C, SL-VGU1-D : SL-VGU1-C / SL-VGU1-D User's Manual
SL-VGU1-EC
SL-VGU1-485
S-LINK V control board
for PCI bus
SL-VPCI
S-LINK V control module
SL-VMC1
e-CON type 4-channel
connector output unit
SL-VTP4E
e-CON type 8-channel
connector output unit
SL-VTP8E
8-channel output terminal
SL-VTBP8
: SL-VGU1-EC User's Manual
: SL-VGU1-485 User's Manual
S-LINK V control board
for VME bus
SL-VVMES2
16-channel MIL
connector
output unit
SL-VTP16C1(-S)
Analog output unit
SL-VTDA1
16-channel output terminal
SL-VTBP16
32-channel output terminal
SL-VTBP32
Local power
supply unit