Improper Use - Bosch Rexroth DB 5X XC Series Operating Instructions Manual

10/44 Safety instructions
Bosch Rexroth AG, DB...5X/...XC, RE25802-XC-B/07.19
If you intend to use the valve with other connection, application or performance
data than those defined by Bosch Rexroth AG in these operating instructions, please
contact Bosch Rexroth AG beforehand. The valve must not be used with other
connection, application and performance data than those defined in these operating
instructions without the written approval by Bosch Rexroth AG.
The valve may only be operated with the hydraulic fluids stated in the technical
data. Please consult us for information on the use of the product with other
hydraulic fluids.
Any safeguards fitted by Bosch Rexroth AG have to be present, properly installed and
fully functional, unless this is not appropriate for setup or maintenance operation.
Their position must not be changed, they must not be circumvented or made
ineffective.

2.3 Improper use

Any use deviating from the intended use is improper and thus not admissible.
The installation or use of inappropriate products in safety-relevant applications could
result in unintended operating states when being used which in turn could cause
personal injuries and/or damage to property. Therefore, please only use a product
for safety-relevant applications if this use is expressly specified and permitted in the
documentation of the product.
A sealing at the valve may not be removed by the machine end-user.
Name plates and product identifications may not be overlacquered; they must
be kept in a readable condition.
Changes and/or modifications on the valve are not admissible, refer to chapter 13
"Extension and modification". This does not apply to the "Modification of the
valve to solenoid-actuated unloading", see chapter 13.1 "Modification of the valve
to solenoid-actuated unloading".
Bosch Rexroth AG does not assume any liability for damage caused by improper use.
The user assumes all risks involved with improper use.