Omron NX Series Network Connection Manual page 30

Right-click the bottommost variable in the list of global variables, and click Create New .
10
Set the following variable name and data type.
11
Variable name: SLC_Power_Supply
Data type: WORD
Select Programming in the Multiview Explorer,
12
and open Programming - POUs - Programs -
Program0 - Section0 .
Enter the following variable name that was created in Steps 9 to 11 to the output on the right of
13
the PackWord block.
Variable name: SLC_Power_Supply
Select Project - Build Controller .
14
10 Programming Using IO-Link
27