Digital Projection POWER 2v User Manual page 91

System Operation
LBV00018; Revision E - 28/01/98
After entering the required information select 'OK', a confirmation box will appear
stating "Computer graphics card will be created/updated. Press 'OK' to proceed or
'CANCEL' to ignore". Select 'OK' to save the new mode.
MODIFYING AN EXISTING COMPUTER CARD MODE
Having selected an existing computer card it is possible to modify a specific mode
for that card. After selecting the mode to be modified from the resolution mode
fly-out list you will enter the 'MODE PARAMETERS' window. The computer and
mode names will be displayed along with the previously defined parameters.
When all the changes have been made press the 'OK' button to execute the changes.
A confirmation box will appear stating- "Computer/Graphics Card will be Updated.
Press 'OK' to proceed or 'CANCEL' to ignore". This is your last chance to cancel the
changes to the mode.
DELETE Command
It is possible to delete a single mode contained within a Computer Card or all the
modes contained within a card effectively deleting the complete card. Deletion of a
Computer Card takes place in the Add Computer screen as the most likely reason
for deleting a card is that there is insufficient memory available to add a new card.
Only Computer Cards you have created are valid for deletion, factory supplied cards
cannot be deleted. "NEW" is also in invalid option as it represents a card which has
still to be created, therefore cannot be deleted. If you try to delete an invalid card a
message box will appear advising you that the card you have selected cannot be
deleted.
Whether deleting all modes or a single mode from a Computer Card the first step is
to select the card from the fly-out menu in the Add Computer screen using the
remote control. Assuming you have selected a valid Computer Card selecting
"DELETE" from the screen options will open the 'DELETE COMPUTER' window.
CÑ39