Digital Projection POWER 2v User Manual page 25

Overview
LBV00018; Revision E - 28/01/98
Remote Receiver
The optional remote receiver is used to pick-up infra-red signals from the remote
control unit and relay them to the projector.and also provides a 'hard wire' interface
between the remote control and the projector.
The remote receiver is a small 75mm x 100mm x 25mm (3" x 4" x 1") matt black
box with mounting lugs on each end and an infra red sensor on the front. On the
underside there are 2 connection points:- a 15 way high density 'D' style connector
for the projector and a 4 way 'LEMO' connector for the remote control (refer to
A—7 and D—39 for more information).
AÑ15