Digital Projection POWER 2v User Manual page 103

LBV00018; Revision E - 28/01/98
Header Action
0a
0b
0c
0d
0f
10
11
12
13
14
15
Displays box on screen
Displays text on screen
Displays icons on screen
Simulates zapper command
Simulates en port command
Grabs engineering messages
Display Test Patterns
Changes image orientation
Selects gamma
Downloads new gamma
Sets projector's colour balance Note, no password required to enter new
System Operation
Implication
Possible to overwrite menu area. Results
will vary according to the aspect ratio
selected.
As above.
As above.
If OSD is switched on, it is possible to
switch the DMD's off.
Messages can be confusing as they vary
between software releases.
As above.
Ramp pattern not available via menu
system so cannot be switched off except
by computer.
Could cause text to be back to front.
None
Overwrites current gamma table. Needs
256 seperate values to be correctly
calculated and entered along with the
relevant checksum. Once in, the projector
must be restarted to utilise them.
colour balance. This then stops accurate
black body curve tracking, leading to
incorrect colour temperatures.
CÑ51