Vmac UNDERHOOD 70 Installation Manual page 4

Document: 1930390
Changes and Revisions
Revision
B ECN: 19-100 Add digital throttle information
C
Additional Application Information
•
2019 + Chevrolet 4500 – 6500 Chassis Cab equipped with 6.6 L Duramax
Diesel.
•
2019 + International CV515 Chassis Cab equipped with 6.6 L Duramax Diesel.
•
Note that this VMAC system may be equipped with either a digital or analog
throttle control.
Registered Trademarks
All trademarks mentioned in this manual are the property of their respective
owners. VMAC's use of manufacturers' trademarks in this manual is for
identification of the products only and does not imply any affiliation to, or
endorsement of said companies.
Loctite®, Loctite® 242 and Loctite® 567 are registered trademarks of Henkel AG &
Company KGaA.
Eaton Aeroquip® is a registered trademark of EATON AEROQUIP INC.
Chevrolete® and Duramax® are registered trademarks of General Motors Company
LLC.
International® is a registered trademark of NAVISTAR INTERNATIONAL
CORPORATION.
Important Information
The information in this manual is intended for certified VMAC installers who
have been trained in installation and service procedures and/or for anyone with
mechanical trade certification who has the tools and equipment to properly and
safely perform the installation or service. Do not attempt installation or service
without the appropriate mechanical training, knowledge and experience.
Follow all safety precautions. Any fabrication for correct fit in modified vehicles
must follow industry standard "best practices".
Notice
Copyright © 2020 VMAC Global Technology Inc. All Rights Reserved. These
materials are provided by VMAC for informational purposes only, without
representation or warranty of any kind, and VMAC shall not be liable for errors
or omissions with respect to the materials. The only warranties for VMAC
products and services are those set forth in the express warranty statements
accompanying such products and services, if any, and nothing herein shall be
construed as constituting an additional warranty. Printing or copying of any page
in this document in whole or in part is only permitted for personal use. All other
use, copying or reproduction in both print and electronic form of any part of this
document without the written consent of VMAC is prohibited. The information
contained herein may be changed without prior notice.
2
Revision Details
ECN: 20-066 Update stud torque value
Printed in Canada
Revised by
MSP
MSP
VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
Checked by
Eng.
Tech. Qual.
Mech. Elec.
N/A ASE MSP AWM
MRH N/A MSP N/A
Implemented
25 Sept 2019
11 Mar 2020