☐
Cut the radiator hose in the marked location, ensuring the cut is square to the
hose section; discard the 1 in section of hose (Figure 6 on page 11).
☐
Cut 1 in from the front edge of each of the OEM lower radiator braces (Figure 7).
Figure 7 — Modify lower radiator support braces
☐
Remove the tension from the fan drive belt.
☐
Remove and discard the front OEM pulley but retain the (×3) OEM crank pulley
fasteners (Figure 8).
12
Cut 1 in from
braces
Figure 8 — Remove front OEM pulley
VMAC - Vehicle Mounted Air Compressors
VMAC Knowledge Base: www.kb.vmacair.com
VMAC Technical Support: 888-241-2289