Vmac UNDERHOOD 70 Installation Manual page 27

☐
Remove and retain the idler fastener.
☐
Discard the roll pin.
☐
Torque the extension post to 21 ft•lb (Figure 32).
Remove fastener
☐
Using the supplied fasteners, install the main bracket onto the OEM AC bracket
(Figure 33).
VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
and roll pin
Figure 32 — Install extension post
Figure 33 — Install main bracket
(OEM drive belt not shown for clarity)
Torque extension
post
(×2) M10 × 1.5 × 45
Modified M10 × 1.5 × 80
25