☐
Route the fan stator harness around back of main bracket and connect it to the
OEM connector.
☐
Apply the supplied protective loom on the OEM harness where it passes near
the rear of the compressor (Figure 38).
☐
Install the compressor onto the VMAC main bracket; install the shortest fastener
in the front passenger side of the compressor (Figure 39).
M8 × 1.25 × 110
28
Figure 38 — Install loom
Figure 39 — Install compressor
VMAC - Vehicle Mounted Air Compressors
VMAC Knowledge Base: www.kb.vmacair.com
Apply protective
(×3) M8 × 1.25 × 120
VMAC Technical Support: 888-241-2289
loom