Vmac UNDERHOOD 70 Installation Manual page 34

☐
Connect the straight fitting on the 3/4 in discharge hose to the fitting on the
back of the compressor.
☐
From the compressor, route the hose down to the top of the frame rail and to
the inside of the cab mount (Figure 42).
☐
From the cab mount, route the hose along the cab, then down to the AOST.
Secure the hose to the cab using the supplied P-clips and fasteners (Figure 43).
32
Figure 42 — Connect discharge hose
Supplied P-clips
Figure 43 — Connect discharge hose
(Step / battery box removed for clarity)
VMAC Knowledge Base: www.kb.vmacair.com
VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289