Vmac UNDERHOOD 70 Installation Manual page 36

For chevrolet 4500 – 6500 chassis cab 2019+, international cv515 chassis cab 6.6 l duramax diesel

Hide thumbs Also See for UNDERHOOD 70:

Table of Contents

☐

Connect the 90° fitting on the longer 1/2 in hose to the driver side fitting of the

VMAC oil cooler.

☐

Route the 1/2 in hose over the engine cross member, following the transmission

cooler lines, then down toward the bottom of the driver side frame rail (Figure 46).

Figure 46 — Connect compressor oil return hose

☐

Continue to route the 1/2 in hose along the same path as the transmission

cooler lines, then loop the hose toward the AOST along the bottom of the

battery box (Figure 47).

Figure 47 — Connect compressor oil return hose

VMAC - Vehicle Mounted Air Compressors

VMAC Technical Support: 888-241-2289

VMAC Knowledge Base: www.kb.vmacair.com

Table of Contents