Melec GD-5410 Instruction Manual page 9

●When installing:
●When inputting power:
●When the overheat alarm (O.H.A) signal is output:
 I
Mount it on a noncombustible member.
Keep it away from combustibles.
Overheating may cause fire.
 I
Do not contact with a wet hand.
Doing so may cause electric shock.
 I
The marks,  and 
indicate terminals on which power voltage
is applied.
Do not touch such terminals while
inputting power and while POWER LED is on.
Doing so may cause electric shock.
 I
Unexpected behavior of the motor may cause
breakage of the machine or injury.
Maintain the state where emergency stop is
enabled at any time.
 I
Overheating may cause fire.
Stop operation upon output of this signal.
-9-
Instructions Manual
, on the front panel