AEG Thyro-E Series Operating Instructions Manual page 37

Display and Operating Elements Operations Manual Thyro Power Manager
The PC software Thyro-Tool Family has to be installed on the PC first. However, it can only
be used partially, e.g. to record a line diagram. As the Thyro-Tool E uses the basic functions
of the Thyro-Tool Family, the latter has to be installed at least.
Afterwards it is possible to install the Thyro-Tool E. The Thyro-
Tool E symbol is now displayed on the surface.
The programme is started by double-click, as usual.
The following screen is displayed:
Figure 18: Thyro-Tool E Main Screen
Data transfer can be started with "start" after having selected the interface (COM) and
actuated "set COM". The controller continuously queries and displays the measured values.
Page 38 of 38 Version: 1.7.2009 8000022632 BAL, EN