Fire Protection - AEG Thyro-E Series Operating Instructions Manual

Operations Manual Thyro Power Manager
Please observe all safety and danger notes compiled on the Unit!
All safety and danger notes compiled on the Unit shall be held in full number
and be held a readable status.
No changes, assemblies, and re-fittings, which impact the safety of the Unit,
are allowed to be performed to the Unit without approval of the
manufacturer.
Please secure that only personnel, who are accordingly assigned for work
on the Unit, are deployed.
Third parties shall be held away from the Unit, and also be pointed to the
possible dangers.
Work performed to the Unit may only be performed by an expert electronical
technician or by vocationally trained persons under the management and
peer-overview of an expert electronical technician in accordance with
technical electronical regulations.
The user must install the Unit within a casing or switch cabinet so that no
dangers exist due to touching and that those applicable standards and
safety regulations are complied with.
For all maintenance and repair work, the Unit must be completely de-
activated and secured against unintended re-activation in accordance with
the 5 safety rules (see chapter 3.4.1.).
Existing safety switches are not permitted to be by-passed, de-activated, or
be manipulated in any manner within any operational mode of the Unit
whatsoever.
Only use OEM spare parts!
Personnel must always wear safety shoes during repair and maintenance
work.
Only physically and psychologically healthy staff members are allowed to
work on the Unit.
Personnel under the influence of impairing medication or under the
influence of alcohol are not permitted to work on the Unit.
Table 2: General Safety Notes
3.4.3

Fire Protection

Fire Danger!
8000022632 BAL, EN Version: 1.7.2009
Intended Use
Page 13 of 13