AEG Thyro-E Series Operating Instructions Manual page 19

Installation
The control has to be carried out by a device provided by the user for systems without
integrated timer. Contacts can be used for this purpose as shown in
outputs, as shown in Figure 8. See also chapter 9.3 Setting of the Timer.
Figure 7: Connection Diagram of the Thyro-E without timer (control by external contacts)
Figure 8: Connection Diagram of the Thyro- E without timer (control by external outputs)
Three-phase systems can be interconnected from three individual Thyro-E systems. In this
case, only one of the three systems has to be equipped with a timer. Such a three-phase
system would consequently consist of one Thyro-E System 3A-xxx E T and two Thyro-E
System 3A-xxx E. Besides the respective other phase connection (L1, L2, L3), control
signals have to be interconnected in addition so that one timer can be used by all systems.
See also the following connection diagram for this purpose:
Page 20 of 20
Operations Manual Thyro Power Manager
Version: 1.7.2009
Figure 7 or voltage
8000022632 BAL, EN