Table of Contents
Advertisement
Installation
Earthing is to be undertaken in accordance with the local regulations!
The system has no own covering. Therefore the user has to ensure a protection against
accidental contact by appropriate measures (installation in a cabinet, closed switch room,
etc.).
4.3
Packaging, Storage, Transportation
4.3.1
Packaging
The equipment is packed for rail or truck transport by the manufacturer.
4.3.2
Storage
The systems may only be stored in dry, ventilated rooms with a firm protective roof in original
packaging for a maximum of six months. It is to be noted that a timer is installed in systems
marked with the letter "T". This timer is set when being installed in the system and is in
operation afterwards. It runs for approx. 5 years without power supply.
• Permissible ambient temperature: -10°C to +45°C
• Permissible relative air humidity: max. 85%
For longer storage durations, the Units should be contained in airtight plastic skins with the
use of commercially available drying agents.
4.4
Requirements for Installation
4.4.1
Dimensions / Weights
The systems posses the following dimensions and weight:
System
Thyro-E, System 3A-10 335 mm 330 mm 155 mm 9.9 kg
Thyro-E, System 3A-16 335 mm 330 mm 205 mm 13 kg
Thyro-E, System 3A-30 400 mm 380 mm 225 mm 23 kg
Thyro-E, System 3A-45 400 mm 380 mm 225 mm 32.6 kg
Table 2: Installation / Dimensions and Weights
Consider the following necessary free space upon assembly:
• 150 mm upwards
• 100 mm downwards
4.4.2
General Requirements
The systems require installation in a vertical position.
Heating up of the systems by heat sources positioned below is to be avoided.
Page 16 of 16
Operations Manual Thyro Power Manager
Width
Height
Version: 1.7.2009
Depth
Weight
8000022632 BAL, EN
Advertisement
Table of Contents
