Qualified Personnel; Safety Conscientious Work Behaviour - AEG Thyro-E Series Operating Instructions Manual

Intended Use
Fire Danger!
In the case of smoke or smell development, as well as in case of fire, the
Unit shall immediately be switched free of voltage, and a report shall be
made to maintenance personnel. Smoking or open fire is forbidden.
3.4.4

Qualified Personnel

The Unit may only be transported, be assembled, be connected, be started
up, be maintained, and be operated by expert staff members who master
the respectively valid safety and assembly regulations.
Safety regulations shall unconditionally be complied with!
All work performed shall be controlled by responsible expert personnel.
The duly responsible manager for Unit safety with regard to the necessary tasks envisioned
must authorize expert personnel.
Expert personnel are those staff members, who:
• possess the vocational training and experience within the according work area,
• are knowledgeable about the respectively valid legal regulations (laws and codes),
standards, rules, instructions, and accident prevention rules,
• are vocationally trained as to the functional features and operational conditions of the Unit,
• recognize dangers, and are capable of implementing measures in order to prevent
dangers,
Regulations and definitions regarding expert personnel are contained within DIN EN 50110-
1:2004 (DIN EN 50110-1:2004 substitutes DIN 57105-1 and DIN VDE 0105 part 1).
3.4.5

Safety Conscientious Work Behaviour

Qualified personnel as defined in chapter 3.4.4 are responsible for safety. These personnel
are also responsible that only accordingly qualified persons are located at the Unit or within
the safety area.
Observe the following items:
Caution!
Refrain from any kind of working behaviour, which impacts the safety of
persons and the function of the Unit in any form.
Operate the Unit only in a proper condition.
No safety fixtures are allowed to be dis-assembled or be put out of function.
Operationally contingent measures shall be implemented prior to the
removal of safety fixtures for the execution of maintenance and service, or
other work tasks.
Always work in compliance with the 5 technical electrical safety regulations!
Page 14 of 14
Operations Manual Thyro Power Manager
Version: 1.7.2009 8000022632 BAL, EN