Welch Allyn Spot Vital Signs LXi Repair Procedure page 8

Radio configuration parameters summary
This form lists the required security parameters to configure the Welch Allyn Spot Vital Signs LXi radio for your facility's network.
Use this form during the radio configuration process and store it at your site. Welch allyn does not store any copies.
Hospital contact for radio configuration
Name:
Phone:
Date:
LAN information
DHCP Enabled [ ] Yes
IP address
Subnet Mask
Default Gateway Address
Primary DNS
Security information
Radio Band 802.11 [ ] a
Wireless Security Mode [ ] Disabled
WPA2 Security [ ] CCMP
(WPA2-PSK and
WPA2-AES only)
EAP Settings EAP Type
(WPA2-AES only)
EAP Identity
EAP Password
Channel
Authentication Type [ ] Open
Default WEP Key [ ] 1 [ ] 2 [ ] 3
SSID
WEP Key 1
WEP Key 2
WEP Key 3
WEP Key 4
WPA Pass Phrase
WPA2 Pass Phrase
[ ] No
[ ] b/g Note p/n 4500-920 is 802.11b only
[ ] WEP 64-bit [ ] WEP 128-bit
[ ] CCMP and TKIP
[ ] TLS [ ] TTLS
[ ] Shared [ ] Auto
[ ] 4
[ ] WPA2-PSK [ ] WPA2-AES
[ ] PEAP [ ] Auto
PSK Format [ ] Hexadecimal [ ] ASCII
8 of 9