Welch Allyn Spot Vital Signs LXi Repair Procedure page 4

Note The Security parameters differ based on the Security Mode selected. The screen examples below
represent the differences.
The WPA2-PSK is the default setting
1
15. Click Save Settings; the default location is C:\program files\welchallyn\Spot LXi radio configuration. Type a
file name in the text box. The filename extension is .lxi.
16. Click Write Params. Proceed to
To configure additional radios with the same settings
1. Disconnect the current radio from the null modem on Port 2 of the Spot Vital Signs LXi.
2. Connect a new Radio to the Spot Vital Signs LXi.
3. Click Load Settings. Click File and select file from
Note
If DHCP is disabled and the radio has assigned an IP address, change to the IP address in the appropriate field.
Each LXi needs to be configured with new parameters using this tool.
4. Click Write Params.
5. Repeat Step 1 through Step 4 as necessary.
For 802.11a/b/g Radio Configuration only:
Select the Wireless Security Mode
"To configure additional radios with the same
Step 15.
2
settings".
3
4
4 of 9